These fountains are cast from a stone mix producing a heavy feature with a beautiful stone finish. The Small Versailles is available in two forms, i.e. the standard version and the pond version. Each is supplied complete with a mains 240Vac pond pump to circulate water through the feature. The pond pumps have 10m of cable for connection to a mains supply. Versailles features are easily assembled and include a full set of instructions.

Dimensions:
   Height: 45" (115cm).
   Width: 41" (105cm).

Standard Version

The standard version is the easiest to install. It is fully self-contained and is suitable for standing on firm ground such as a patio or driveway. Water cascades from the top of the feature down as far as the lowest bowl only. It does not cascade down as far as ground level, therefore a pond or pebble pool base is not required. It is supplied with a 1000 litre per hour submersible pond pump, which resides in the lowest tier of the feature.

Pond Version

This version is suitable for installation in a pond or on a pebble pool base. Water cascades from the top of the feature right down to ground level. A container of some type is therefore required to catch and hold the water around the base of the feature. It is supplied with a more powerful pond pump than the standard version, i.e. a 2000 litre per hour submersible pump. The pond pump should reside in the pond or pebble pool at the base of feature.

Pebble Pool Base

These are available for purchase as an option for use with the pond version of the Versailles Fountain. A pebble pool base basically consists of a sump with a cover that can be set into a hole in the ground. The cover is a shallow tray and fits over the sump to provide a level surface on to which you can stand your feature. This tray has drainage holes that allow water falling from the feature to drain back into the sump. The surface of the tray is normally covered with slate shale or coloured stone, such that the pebble pool base itself is not visible.

We recommend using one of two pebble pool bases for this feature, i.e. the Finia 1375 or the Finia 1800. Both are large, heavy-duty pebble pool bases. The Finia 1375 has a square shaped tray that measures 1.375m (55") along the side. It can take evenly distributed loads of up to 250kg. The Finia 1800 is circular in shape and is even larger than the Finia 1375 having a diameter of 1.8m (71") and is capable of taking loads of up to 1000kg. More information on each of the Finia bases is available by clicking the relevant 'i' icon.

Please make your selection from the table below by clicking the appropriate circular checkbox. More photographs and information for each option is available by clicking the information icon. Once you have made your selection click the '+' to add to your basket. These features are covered by a 12 month guarantee and prices are inclusive of mainland UK delivery.

Versailles prices include mainland UK delivery.

To purchase please make your selection below and then click the plus button to add it to your shopping basket.

Small Versailles Selection: Please check the box below to select the version of the Versailles you require. The two versions of the feature are described above.

Small Versailles standard version with pump at £459.00.

Small Versailles pond version with pump at £486.00.

Please note that the manufacturer's 2007 recommended retail prices for the standard Small Versailles and the pond version are £541.99 and £595.99 respectively.

Options: Please check the boxes below for the options you require. More information on each option is available via the 'i' icon.

purchase without a pebble pool base.

include a Finia 1375 pebble pool base at the additional cost of £122.99.

include a Finia 1800 pebble pool base at the additional cost of £369.00.

Buy