Rapid Falls Water Blades: WFOL UK

					barrels

water features	water butts	garden ponds	pumps & taps	planters	garden furniture

Rapid Falls Water Blades

-> Department: Water Features (show all categories in department)
->Category: Water Blades (show summary of all items in category)

Rapid Falls Water Blades are similar to the Rapid Falls blades but they have an exit spout that is deeper and stylishly curved. As well as providing a curved exit path for water emerging into the waterfall the wider spout projects the falling water further from the position where the unit is mounted. The increased spout depth may be required where it is intended to install one of these units behind a wall with the spout projecting out through a slot in the wall.

These high quality blades are made from stainless steel and consist of a box shaped chamber that is 90mm by 75mm. The chamber fills up through a system of baffles and then flows over the edge of the lip. The blade should be mounted level in order that it produces a sheet of water that is of maximum width. The front of the chamber has a curved spout which, when mounted correctly spreads the water into a thin sheet. Rapid Falls are available in five widths with the option of rear or bottom hose connection points or inlets. The smallest blade has only one water inlet where as the widest one has three that are evenly spaced along the length of the chamber.

Please note the photograph shows a bottom entry Rapid Falls mounted on a stainless steel feed pipe. The feed pipe shown is not included with the feature.

The diagram to the left shows the cross sectional dimensions and the positions of the inlets for the rear and bottom entry options. The inlets are pipe stubs with a diameter of 40mm.
Widths and flow requirements are shown in the table below.

Model	Width / mm	Width / inches	litres / hour	gallons / hour	no. of inlets
SEG2071	300	12	3000	660	1
SEG2072	600	24	6000	1320	1
SEG2073	900	36	9000	1980	2
SEG2074	1200	48	12000	2640	2
SEG2075	1500	60	15000	3300	3

Selection: Please check the boxes below for the options you require and click the 'buy' button to add to your basket.

Two versions of each size are available, i.e. rear entry and bottom entry versions. Rear entry versions have the pipe connection on the back of the water blade such that it can be mounted on a horizontal surface, for example it could be positioned on the top edge of a wall. Bottom entry models have the pipe connection on the base of the unit such that it can be mounted on a vertical face, for example the face of a wall. It is also possible to build a water blade into a wall so that only the edge of the blade is visible. An example of this is shown in the photograph at the top of the page.

An optional fitting kit is available with each version. The fitting kit consists of hose tails, flow controllers and a length of flexible tube. Full details of each fitting kit is available by clicking the 'i' icon next to the fitting kit price.

Rapid Falls are available with a light option. With this option underwater lights reside in the trough section illuminating the water blade to create a stunning night time feature. Lights are available in red, blue, green and white.

Please note that all prices on this page include mainland UK delivery and VAT.

300mm wide version Price £109.00

SEG2071 Bottom Entry Version.

SEG2061 Rear Entry Version.

Include fitting kit an additional £19.49.

Include 4000 litre per hour pond pump at an additional £48.00.

Select light option:

600mm wide version Price £139.00

SEG2072 Bottom Entry Version.

SEG2062 Rear Entry Version.

Include fitting kit an additional £19.49.

Include 8000 litre per hour pond pump at an additional £82.50.

Select light option:

900mm wide version Price £169.00

SEG2073 Bottom Entry Version.

SEG2063 Rear Entry Version.

Include fitting kit an additional £33.49.

Include 10000 litre per hour pond pump at an additional £89.00.

Select light option:

1200mm wide version Price £199.00

SEG2074 Bottom Entry Version.

SEG2064 Rear Entry Version.

Include fitting kit an additional £40.49.

Include 15000 litre per hour pond pump at an additional £139.00.

Select light option:

1500mm wide version Price £233.00

SEG2075 Bottom Entry Version.

SEG2065 Rear Entry Version.

Include fitting kit an additional £40.49.

Include 20000 litre per hour pond pump at an additional £172.00.

Select light option:

National Sales 0845 638 1822
Please order online where possible.
Send Email

www.oak-barrel.com
Water Features On-line - supplier of quality garden products.
Office Hours: Mon-Fri 9.00am - 4.30pm & Sat - 10.00am - 5.00pm
(UK calls charged at local rates according to your telecoms provider)

Free mainland UK delivery on all orders over £50.

Category - Water Blades: Category Index

prev item | Show Thumbnails | next item

| |