Two, Three and Four Foot Monoliths
The photograph to the left shows our two, three and four foot monoliths side-by-side. The monoliths are made from plumb coloured, Welsh slate. They have a flat sawn base so that they can stand
vertically and a 1¼" (32mm) hole bored up through their centre. The central borehole provides a passage for water to be pumped up through the monolith so that it can ooze from the top and trickle down the
slate sides.
Monoliths may be purchased with an optional pebble pool base. The pebble pool base has a sump, which can be sunken into the ground and provides a reservoir
of water for the feature. The top section of the pebble pool contains a perforated disk that can be covered with shale or coloured pebbles. The heavy-duty pebble pool bases that are
provided are robust enough to carry the weight of the monolith.
Monoliths may be purchased with a number of options. They may be purchased without a base, with a suitable pebble pool base or with an Easypond base. Other options
include a suitable submersible pond pump with a length of pipe to connect to the monolith. To order a complete feature select the size of
monolith, one of the two base options and the submersible pond pump.
To order Please make your selection from the table below by clicking the appropriate circular checkbox. More photographs and information for
each option is available by clicking the information icon. Once you have made your selection click the 'buy' button to add to your basket. The prices for all
water features on this page are inclusive of mainland UK delivery. Please note that these monoliths are are made of real slate and are therefore heavy items. Delivery will be made to
your premises only. To move and install your monolith you will require at least two strong people for a two foot monolith and three strong people for a three or four
foot monolith. |