Village Pump Sundries
Product Code: VPS
Add to cart
Set of four M10 mounting bolts, 60mm long, with nuts and washers suitable for mounting a village pump. The base of the pump occupies approx. 12mm of the length of the bolt.
Set of 4 M10 mounting bolts @ £2.99
Short Mounting Bolts
Set of four M10 mounting bolts, 50mm long, with nuts and washers. These short bolts are recommended for bolting a village pump to a pump stand.
4 short M10 mounting bolts @ £2.99
Spare leather washer for village pump. The washer fits on the village pump's (P1 pump) plunger. It is a replacement for existing washers that have become worn.
Pump bore: 75mm, central hole: 51mm.
*Spare Village Pump Washer @ £8.99
Spare plunger for village pump (P1). Suitable for pumps with a 75mm bore.
Spare Village Pump Plunger @ £13.99
Hose adapter allowing the connection of a pond pump to a Cast Iron Pump. The adapter consists of a 1¼" BSP threaded connector and a hose tail suitable for 12mm nominal internal diameter hose. It screws in to the base of the pump and enables a pond pump to be fitted via a length of garden hose.
Hose Adapter @ £4.00