This granite monolith can create a very natural looking water feature with its rugged, granite finish. It has a port hole drilled through the face of the stone, which meets with a central bore hole running up from the base of the feature.

 

When installed water is pumped up the central bore hole and flows out from the port hole at both sides of the feature. A waterproof spotty light may be fitted inside the port hole to illuminate the water as it flows out. Please note that the spotty light shown in the photographs is not included with the feature but is available as an option.

 

While it is possible to mount this feature on a plinth in a garden pond we recommend the use of a pebble pool base for most installations. The Finia 1000 is a heavy duty pool that can withstand the weight of a granite feature of this type. For installation it is normally buried in the ground, covered with stone or shale and the feature positioned on top of it. The Finia 1000 is also available as an option.

 

A pond pump is required to drive the water from the pond or pebble pool base up through the feature's central bore hole to the point at which it emerges from the top of the granite. Again the pond pump is not included with the main feature but is available as an option.

 

When the pond pump is purchased as an option it is supplied with the flexible hose etc. needed to connect it to the feature. The pond pump will normally reside beneath the water, inside the pebble pool base and has 10m of cable for connection to a mains 240V supply.

 

Overall height: 70cm (27½"). Width: 40cm (16"). Depth: 25cm (10"). Weight: 125kg.

 

Options:

 
Add a 100cm Finia pebble pool base to the order at an additional £106.80

Add a 2500 lph pond pump with connection hoses to the order at an additional £64.80

Add a spotty light to the order at an additional £40.80