This water feature is shaped like a basin. It has a pipe entry at the bottom that feeds water into a bore hole through the centre of the feature.

 

The top of the basin is scooped out such that it fills with water and overflows. It is possible to fit a waterproof spotty light at the top of the basin to give an underwater lighting effect.

 

Please note that the spotty light shown in the photograph is not included with the feature but is available as an option.

 

This feature could be nested in rocks at the side of a garden pond or positioned on a pebble pool base. When used on a pebble pool base the base should be buried in the ground and covered with the stone of your choice.

 

If a pebble pool is required then we recommend using the Finia 1000, which is a heavy duty pool that can withstand the weight of a granite feature of this type. The Finia base provides a sump containing a reservoir of water for the feature and is available as an option with this feature.

 

A submersible pump is required to drive the water to the top of the feature and this will normally reside beneath the water level, inside the pebble pool base or garden pond. The pump is an optional extra, which comes with a length of flexible tube and 10m of cable for connection to a mains 240V supply.

 

For installation the tube from the pump should connected to the base of the feature. The pump will then circulate water from the pond or pebble pool base up to top of the feature. This water cascades down and ultimately returns to the pond or pebble pool base.

 

Height: 40cm (16"). Diameter: 45cm (18"). Weight: 70kg

 

Options:
 
Add a 100cm Finia pebble pool base to the order

Add a 2500 lph pond pump with connection hoses

Add a spotty light